Textures Stone LVT Flooring
Textures stone is glue down LVT in six stone-effect tiles, from white marble to dark slate. Each tile is 304.8 x 609.6 mm, and a pack of 16 covers 2.97 m². It has a 0.55 mm wear layer and costs £29.99 per m².
Free deliverySale -50%
Free deliverySale -50%
Free deliverySale -50%
Free deliverySale -50%
Free deliverySale -50%
Free deliverySale -50%Watch: Textures Stone LVT: Six Stone Effect Tiles in One Minute
Textures stone is stone-effect LVT flooring in large tiles, 305 x 610 mm. This one minute guide shows all six.
| Stone | Code | Look | Per m² | Per pack |
|---|---|---|---|---|
| Carrara White | TS01 | Carrara marble | £29.99 | £89.07 |
| Carrara Dark | TS02 | Dark Carrara marble | £29.99 | £89.07 |
| Grey Stone | TS03 | Natural stone | £29.99 | £89.07 |
| Dark Slate | TS04 | Natural slate | £29.99 | £89.07 |
| Sandstone | TS05 | Natural sandstone | £29.99 | £89.07 |
| Limestone | TS06 | Natural limestone | £29.99 | £89.07 |
The six stones
Carrara White and Carrara Dark copy marble with fine veining, one pale and one deep. Grey Stone and Dark Slate are the greys. Sandstone and Limestone are the softer, natural tones. Each has a bevelled edge and an embossed surface.
Textures Stone LVT Flooring colour chart
Screen colours vary a little. Check a sample in your own light.
Tile size and laying patterns
The tile is 304.8 mm wide and 609.6 mm long, which is 12 x 24 inches. There are 16 tiles in a pack. It is 2.5 mm thick, so it adds little height at a doorway.
You can lay it straight, in a grid, or in brick bond, with each row offset. Brick bond hides small errors in the walls and suits a long room. Either way, add 10% for cuts. The flooring calculator and the LVT adhesive calculator do the sums. Glue down tile needs a smooth subfloor, so read the subfloor preparation guide first.
Real homes: Textures Stone LVT Flooring
Kitchen, bathroom or hall
A stone look suits the rooms where real stone would be cold and hard to clean. This floor is warmer and softer underfoot, with no grout to seal or scrub. It is water resistant, so kitchens, bathrooms and utility rooms are fine. It is also suitable for underfloor heating. Order a sample to see the veining and tone.
What a 20 m² room costs
Flooring only, with 10% for cuts and whole packs.
| Floor | Wastage | Area to buy | Pack size | Packs | You get | Per m² | Per pack | Total |
|---|---|---|---|---|---|---|---|---|
| Textures stone tile | 10% | 22 m² | 2.97 m² | 8 | 23.76 m² | £29.99 | £89.07 | £712.56 |
Textures stone questions people ask
Is stone effect LVT better than real stone?
It is a different choice. LVT is warmer and softer underfoot than stone, needs no sealing and is lighter to carry. Order a sample to compare the look.
Does it need grout?
No. The tiles are bonded edge to edge. The bevel gives a soft line between them.
Can it go in a bathroom?
Yes, the tile is water resistant. Keep standing water off the edges, and ask your fitter about the area right beside a shower.
Which tile pattern is easiest?
A straight grid is the simplest. Brick bond takes a little more setting out but forgives a wall that is not straight.
Next steps
- Order a sample and see the stone in your own light, wet and dry.
- Flooring calculator: turn your room size into packs.
- Textures LVT flooring: the whole range, including plank and herringbone.
- Textures FloorCare concentrated LVT cleaner: for the regular mop.